Technologies
Adsorption Chillers
 
Grid elec'y vs NG
On-site Genset
 Geothermal
 
 
Are you thinking about installing a Genset and using its waste heat to drive an ADsorption chiller? If its for a shopping centre, airport or similar, remember the Genset's waste heat can be used in winter for space heating.
Plant using grid electricity & compressor based chillers
Site Location    
Annual electricity consumption MW.hrs/yr } Total of electricity bills
Annual electricity cost $/yr
Annual natural gas consumption GJ/yr } Total of gas bills
Annual natural gas cost $/yr
Cooling plant's rated capacity } Taken from name plate
Cooling plant's rated COP  
Aggregated chiller run-time factor    
Your plant's current carbon footprint tonnes of CO2-e
Your plant's energy cost $/yr  
Plant using self produced (Genset) electricity & ADsorption chiller cooling
Required genset size to heat ADC kWe
Electricity saved by ADsorption chiller MW.hrs/yr
Electricity needed on site from CHPP MW.hrs/yr
Electricity production capacity of CHPP MW.hrs/yr
Surplus, saleable CHPP capacity MW.hrs/yr
Natural gas consumption of CHPP GJ/yr
Total site natural gas consumption GJ/yr
Plant's new energy cost $/yr
Plant's new carbon footprint tonnes of CO2-e
Annual energy bill savings $/yr  
 
Annual carbon footprint reduction tonnes of CO2-e
   
Additional cost savings from the Carbon Trading Scheme (CTS)
Enter your estimated carbon price $/tonne of CO2-e
CTS savings $/yr  
Total possible future savings $/yr  
     

 

The above illustration is to be used purely as guide and is applicable to Australia only.
 
(c) Copyright 2006 - 2008 Emissionless Pty. Ltd. All rights reserved